Spouting Clean Solutions Products, Leaf & Bird Stop and Pour ... Restore
0800 39 99 99
Leaf & Bird Stop
After 21 years experience and after trialling most of the products on the market today, we have found Leaf & Bird Stop to be the most effective solution.
This is a bottlebrush system made up of polypropylene bristles woven together with a galvanised steel wire. It is UV stabilised and designed to withstand New Zealands' unique and dynamic weather. It comes in 2m lengths and will fit in all gutter types.
Leaf & Bird Stop works by holding the leaves and debris above the water line, allowing the water to flow freely beneath it; it also stops birds from nesting in your spouting. Other products claim that you will "never need to clean your gutters again". Unfortunately this statement is untrue and misleading. No matter what system you have in place, all guttering needs to be maintained on an annual basis. So why not make it as easy and hassle free as possible?
Leaf & Bird Stop is a simple to install "DIY" product. We can come and install it for you, or we can supply the product to you and you can install it yourself!
Technical Aspects
Order Leaf & Bird Stop here
Leaf & Bird Stop is made of the highest quality materials, consisting of black polypropylene bristles that contain a UV inhibitor to ensure long life.
A twisted, galvanized wire anchors these bristles securely in place.
Leaf & Bird Stop is 100mm in diameter. This is suitable for all standard width spouting.
For ease of installation and removal for cleaning, each length is 2m long and is sold as a kit of 5x2m lengths.
The 10m kits are packaged in a high quality clear polyethylene bag with full installation and cleaning instructions provided.
Instructions for Use
1. For best results, clean guttering/spouting before installing Leaf & Bird Stop.
2. Remove Leaf & Bird Stop from bag.
3. Place Leaf & Bird Stop firmly into spouting/guttering ensuring it slides under the spouting/guttering clips. Bend around corners as necessary.
Pour N Restore
Pour-N-Restore is a revolutionary oil stain remover, suitable for use on concrete and masonry surfaces, such as driveways! It lifts ... absorbs stains with no scrubbing, no rinsing and no mess!
Over the last 18 years, we have seen a lot of unsightly stains on driveways that can ruin the whole appearance of a property. We have trialled a great many 'oil stain removers' but have found that whilst most are effective in bringing the stain to the surface of the concrete, it is very difficult and messy to remove the stain from this point.
Pour-N-Restore is a break-through in that not only does it contain a powerful degreaser, but also an absorbent powder which soaks up the residue of both the stain and the degreaser.
To restore concrete and masonry, just apply Pour-N-Restore Oil Stain Remover, let it dry from a liquid to a powder, and sweep it up for easy disposal of an unsightly stain!
Citrus based, biodegradable, phosphate free and safe around children and pets - what more could you ask for?!!
Pour-N-Restore is available in several sizes. Included with each purchase is a Free 'V-notched Spreader' which allows the product to be spread to the optimum consistency for best results and minimum wastage.
Please note that Pour-N-Restore is not suitable for use on black-top (asphalt)...